15 Minute News15 Minute Fun
Follow Us

Technology Videos, Page 2

Advances & Discoveries in Science and Technology

Making Things Disappear Into Darkness

Making Things Disappear Into Darkness

Vantablack is a special substance that was designed to absorb all light it comes into contact with. It does such a good job it can absorb up to 99.965% of light meaning no light reflects off of it for you to see.

Protecting Your Data from Nuclear Threat

Protecting Your Data from Nuclear Threat

The Pionen Data Center in Sweden can be found in a former nuclear bunker 100ft under ground. As Sweden's largest internet service provider it was setup to protect some of the most sensitive information in the world including the servers of WikiLeaks.

Germany Has Created an Artificial Sun

Germany Has Created an Artificial Sun

Check out this artificial sun created in Germany consisting of 149 spotlights that are 10,000x brighter than the mid day sun. While on it generates temperatures of 5,400°F

Revolutionary Robotic Tentacle

Revolutionary Robotic Tentacle

This crazy new robotic arm/tentacle will revolutionize how robots operate thanks to it's incredible dexterity. The arm is made from a soft silicone structure and operates with a pneumatic system that pumps compressed air.

Cool Science Experiment by Dropping Water and Alcohol into Oil

Cool Science Experiment by Dropping Water and Alcohol into Oil

Try this cool science experiment at home and see what science calls Marangoni bursting. All you need is water, alcohol and oil. The result is pretty incredible to watch.

Creating a Human Heart with Spinach Leaves

Creating a Human Heart with Spinach Leaves

Watch as scientists explain how they can create a human heart using a spinach leaf. The process involves removing the plant cells and replacing it with human cells which can then make use of the leaf's vascular system.

Tiny Technology Carves Lincoln's Face into a Coin

Tiny Technology Carves Lincoln's Face into a Coin

Watch as the team at Berkeley Lab carve the face of Abraham Lincoln into a coin on a microscopic level with incredible detail. The technology can work at the atomic level but takes 18 hours to create.

Flushing Toilets in the North vs the South

Flushing Toilets in the North vs the South

It's long been believed that that water swirls in the opposite direction depending on which hemisphere you're in. So let's get scientific and see if that's true.

Guaranteed Bulls Eye Every Time with the Motion Tracking Dartboard

Guaranteed Bulls Eye Every Time with the Motion Tracking Dartboard

It doesn't matter how bad you are at darts this automated dartboard will make you a winner in no time. The automated system uses motion capture to calculate where the dart is and moves the board to make sure you hit a bulls eye every time.

The Burger Flipping Robot is Here

The Burger Flipping Robot is Here

The fast food world is about to change with an all new burger flipping robot. As soon as this bad boy is waterproof poor old SpongeBob SquarePants is gonna be out of work.

How Tragedy Shaped Engineering

How Tragedy Shaped Engineering

See how a tragic mistake at the Hyatt Regency Hotel lead to a change in the engineering world. It all boiled down to a simple change that was overlooked and resulted in a catastrophic failure.

World's Most Powerful Rockets Tested in 360°

World's Most Powerful Rockets Tested in 360°

Watch as NASA tests their new RS-25 engines which are considered the world's most powerful rockets in the world. Better yet you can watch them firing in beautiful 360°

Blowing Up a Watermelon with Electricity

Blowing Up a Watermelon with Electricity

It's time for more backyard science fun, this time we're playing with electricity. Watch what happens when a capacitor is used to pass 20,000 volts to a watermelon all at once.

Capturing Molten Copper in Slow Motion

Capturing Molten Copper in Slow Motion

The Slow Mo Guys are at it again this time capturing molten cooper as it cools. The 1,200°C copper liquid is mesmerizing to watch but begins to cool and solidify almost immediately even in slow motion.

3D Print a House in 24 Hours

3D Print a House in 24 Hours

Check out this awesome house that was 3D printed in 24 hours from start to finish. The completed residential house printing project is the first of it's kind and could be the answer to future housing.

More Technology Videos



Previous Technology Videos
Next Technology Videos